STAR GENESIS PRIMER and SEALER is a new generation of high performance, adhesion promoting primers that are offered to serve a diverse set of needs in an evolving sealcoating industry. STAR GENESIS PRIMER and SEALER is a water based, 100% acrylic polymer coating that is fortified with specialty chemicals that will promote adhesion to problematic areas in both asphalt and concrete pavements.STAR GENESIS PRIMER and SEALER is the FIRST product you should look to when you encounter a challenging adhesion situation over problematic surfaces that need to be sealcoated.STAR GENESIS PRIMER and SEALER overcomes the common problems faced every day when working to cover surfaces that have been contaminated by oils, grease, fats, tree sap deposits, fuel spillage and anti-freeze drippings. Also, highly effective in priming aged pavements and polished aggregates, freshly patched asphalt areas and concrete pavements that are difficult for sealcoatings to adhere to.
• As a Coating – will prevent oil, grease and contaminants from penetrating into the asphalt pavement.
• As a Primer – will prevent oil, grease and contaminants from bleeding up through the sealcoating, and will improve surface appearance.
•STAR GENESIS PRIMER and SEALER will effectively stop, or greatly reduce, tile and carpet staining which is sometimes caused by tracking sealcoatings by foot into stores and businesses. Apply a finishing coat ofSTAR GENESIS PRIMER and SEALER along the entire width, and preferably out to a 50- foot depth, in front of the building entrances at full strength, without dilution.
• On Concrete – will aggressively adhere to concrete surfaces and act like a sealcoating by itself or as a primer so that sealcoating appears uniform across all surfaces on a properly with both concrete and asphalt pavements.
• Will eliminate the need for excessive surface preparation that could damage the asphalt substrate.
• Is easy to use straight from the container. Minimal on-the-job mixing.
• Dries to rich black satin finish in 30 minutes, Cures in 2 to 4 hours.
• Useful as a black out paint for old traffic control markings.
STAR GENESIS PRIMER and SEALER is excellent where concrete and asphalt are used together and a uniform appearance is desired, for example; drive through lanes or gas station fueling pads. Recommended on all asphalt surfaces where contamination and oil spotting or black out is needed and problems need to be treated prior to sealcoating application. Excellent for priming aged asphalt aggregate that is polished due to tire abrasion, allowing sealcoating to adhere more tenaciously than unprimed surfaces.
IMPORTANT WEATHER LIMITATIONS
- Surface and air temperature should be a min. 50° F (10° C) and rising.
- Do not apply on rainy, foggy, or extremely humid days, or when rain is in the forecast within 24 hours.