GENERAL DESCRIPTION
STAR-TRITON is part of a new generation of pavement sealcoatings that are high performance, effective alternatives, to both refined tar and asphalt emulsion sealers. STAR-TRITON will perform to the standards you have come to expect from the entire family of STAR sealcoatings. STAR’s formulations use only the highest quality raw materials and STAR-TRITON is based on carefully selected grades of petroleum resins, minerals, specialty additives and performance boosters, STAR-TRITON has an extraordinary degree of toughness and water repellency, unmatched by any competitive sealer. STAR-TRITON forms a tough, durable and flexible coating that protects asphalt pavements from the damaging elements of weather, water penetration, de-icing salts, traffic damage, surface raveling/checking, gasoline and other petrochemical contaminations.
OUTSTANDING PROPERTIES
• Comparable to Refined Tar Sealers in toughness, overall durability and application procedure, STAR-TRITON will perform to the standards you have come to expect and trust from STAR branded products.
• Better than Asphalt Emulsion based sealcoatings in resistance to fuel, salt and petrochemicals STAR-TRITON gives you more options.
• The color stability of STAR-TRITON is comparable to Refined Tar Sealers, unlike Asphalt Emulsions, which has a tendency to fade with aging.
• STAR-TRITON will help you expand your season in early spring and late fall significantly longer than Asphalt Emulsion sealers.
• STAR-TRITON is water-based, easy to apply, handle and store. Non-burning, non-irritating and with no significant odor.
• Beautifies while It protects – STAR-TRITON dries to an appealing dark charcoal color that enhances the value of the property.
RECOMMENDED USES
STAR-TRITON is recommended for all asphalt pavements; home driveways, commercial parking lots, apartment complexes, restaurants, schools, gas stations, truck terminals, airfields/taxiways/airport shoulders, and many more.
MIX DESIGN RECOMMENDATIONS
Important – All mix designs must include clean, quartz, angular sand
| US | METRIC | |
| STAR TRITON | 100 Gal. | 100 Liters |
| Water (Clean, Potable) | 35-40 Gal. | 35-40 Liters |
| Sand/Aggregate 50-70 AFS* | 300-500 Lbs. | 36-60 Kg. |
* Crushed slag (i.e. Black Beauty) may be used as the aggregate, provided
it is clean, angular and within 50-70 AFS gradation.
The use of an additive is optional, follow STAR’s recommendations
APPLICATION RATES
Must be applied to structurally sound pavements. Do not apply over chip seal or gilsonite sealed surfaces. The application rates shall be dictated by the traffic pattern and usage.
1. For Low to Medium Traffic Areas Apply Two (2) Coats:
a) Concentrated Sealer – the total coverage rate 45 – 50 Sq. Ft./Gal. (1.1 – 1.22 Sq. Meter/Liter).
b) Mixed Sealer – 0.27 – 0.30 Gal./Sq. Yd. or 30 0.81 Sq. Meter/Liter).
2 For High Traffic Areas Apply Three (3) Coats:
a) Concentrated Sealer – the total coverage rate 32 – 36 Sq. Ft./Gal. (0.8 – 0.9 Sq. Meter/Liter).
b) Mixed Sealer – 0.38 – 0.42 Gal./Sq. Yd. or 21 0.59 Sq. Meter/Liter).
APPLICATION TOOLS
• Use conventional tools; Brush, rubber squeegee or spray rig.
• Clean up with Water. Do not discard washings in the bodies of water or down
sewer drains.
• Dried sealer on tools – Wire brushing, scarping and peeling. • Keep stored containers sealed tightly.
CURING TIME
Cure time will vary according to temperature and humidity at the time of application. Insufficiently cured films wear prematurely. Lower temperatures, high humidity and lack of direct sunlight will prolong the cure time. Higher temperatures, lower humidity and direct sunlight accelerate the cure process. If a second coat is to be applied, allow the first coat to dry sufficiently to withstand light vehicular and pedestrian traffic without damaging or scuffing the coating. After the application of the last coat, allow the coating to cure at least 20-24 hours under good drying conditions.
SPECIAL INSTRUCTIONS
Apply only on unsealed asphalt or surfaces previously sealed with either Asphalt Emulsion or Refined Tar based sealers. Do not apply over surfaces sealed with gilsonite and other solvent based seal coatings. New asphalt pavements must be allowed to cure at least 90 days in hot weather. Perform a water break free test to confirm that the surface oils have dissipated, by spreading water on the pavement. If the water does not bead, pavement is ready for seal-coating. Not recommended for steeply inclined surfaces, as they may become slippery when wet.
CAUTIONS
KEEP FROM FREEZING / KEEP OUT OF REACH OF CHILDREN
Wear gloves and protective clothing. In case of contact, flush skin or eyes imme- diately with fresh water. If the product gets in the mouth or eyes see a physician immediately. Consult a Safety Data Sheet for details.
PACKAGING & AVAILABILITY
5-Gallon plastic pails, 55-gallon drums & 275-gallon plastic totes, and bulk at all STAR plant locations.
WATCH VIDEO
IMPORTANT WEATHER LIMITATIONS
- Surface and air temperature should be a min. 50° F (10° C) and rising.
- Do not apply on rainy, foggy, or extremely humid days, or when rain is in the forecast within 24 hours.
- If the pavement temperature is over 100° (38°C) dampen the pavement with a fine mist of water to facilitate even spreading. Do not allow water to puddle on the surface.